TV Menu Operation

SETTINGS MENU

Quick Settings		Allows you to quickly access some of the most useful functions on the set.
Picture		Enables control of the picture settings to ensure optimal performance and personal preference settings to be stored.
Sound		Controls the individual sound settings on the television.
Channel		Set up your channels and tuning.
Network		Connection to your Wi-Fi or Ethernet network.
Time		Gives control over all the time and date functions on the set.
System		Provides access to the overall system controls within the television.
About TV		Shows relevant information about the set and its functions.

Quick settings menu

Audio Track	Allows you to choose between the audio channels being transmitted on Digital Television. Currently for Freeview only normal sound or the Audio Description audio channels can be selected.
Subtitle	Turn subtitles on and off.
Subtitle Track	Appears when Subtitles (above) are turned on and allows you to select which subtitle track is to be used. There may be more than one sub-title available for use, i.e. English Subtitle or Hearing Impaired subtitle.
Teletext	Turn Teletext on or off. This can also be achieved by pressing the [Teletext] button on the remote control.
Record List	Shows a list of recorded TV programmes via a connected USB memory stick or USB hard drive. While in the ‘Recorded List’, press the [BLUE] button to access the ‘Schedule List’. Refer to the ‘USB RECORD’ page for further information.
Schedule List	The schedule list allows you to view your reminders and recordings. There are two icons, the clock symbol denotes a reminder, the camera indicates a recording. To select use the [UP] and [DOWN] arrow buttons.

Playback files from Record list

Press [RED] to delete a selected recording.
Press [GREEN] to sort the items in the record list by date.
Press [YELLOW] to sort the items in the record list by name.
Press [BLUE] to enter the schedule list.

Note: Recording is only possible when a USB stick is plugged in and formatted at FAT32. VIsit the ‘USB RECORDING’ page for more information.

Picture Menu

For complete control of your picture settings, enter the ‘Picture’ menu to set up the following adjustments. These will allow you to enhance your viewing experience and utilise the full capability of the television.

Economy	Power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel). In Economy mode, the TV will switch itself to Standby mode after 3-5 hours in the event that the TV buttons or remote control buttons are not pressed (change the picture mode to another setting to de-activate this function) In the economy mode the brightness of the picture may be reduced.
Standard	Standard settings
Personal	Allows you to change the picture settings to your personal preference. These settings are saved automatically.
Dynamic	Recommended settings for fast moving pictures.
Movie	Picture has less colour and is darker.

Standard	Default settings.
Warm	Increases red within the picture.
Personal	Your own settings.
Cold	Increases blue within the picture.

Noise Reduction	Off, Low, Medium, High.
Gamma	Changes the range of the colour reproduction. Low, Medium and High.
Active Contrast	Allows for the contrast level to be adjusted automatically depending on picture content. ‘ON’ or ‘OFF’.
Backlight	Switches optimization of the backlight and contrast of the picture.	Range: 1-100
Red	Adjust the amount of red in the picture.	Range: 1-100
Green	Adjust the amount of green in the picture.	Range: 1-100
Blue	Adjust the amount of blue in the picture.	Range: 1-100
CMS Hue	This is a standard to adjust the colour either more reddish or more bluish in tone. R/G/B/C/M	Range: -63 to 63
CMS Value	A higher value makes the image brighter. A lower value makes the image darker. R/G/B/C/M	Range: -32 to 31
CMS Saturation	Increases or decreases the saturation of a selected colour. R/G/B/C/M	Range: 0 to 15

Auto
16:9
4:3
Zoom 1
Zoom 2

Expert Settings

Use these adjustment settings to improve the picture in more detail.

Noise Reduction	Off, Low, Medium, High.
Gamma	Changes the range of the colour reproduction. Low, Medium and High.
Active Contrast	Allows for the contrast level to be adjusted automatically depending on picture content. ‘ON’ or ‘OFF’.
Backlight	Switches optimization of the backlight and contrast of the picture.	Range: 1-100
Red	Adjust the amount of red in the picture.	Range: 1-100
Green	Adjust the amount of green in the picture.	Range: 1-100
Blue	Adjust the amount of blue in the picture.	Range: 1-100
CMS Hue	This is a standard to adjust the colour either more reddish or more bluish in tone. R/G/B/C/M	Range: -63 to 63
CMS Value	A higher value makes the image brighter. A lower value makes the image darker. R/G/B/C/M	Range: -32 to 31
CMS Saturation	Increases or decreases the saturation of a selected colour. R/G/B/C/M	Range: 0 to 15

SOUND MENU

For complete control of your audio settings, enter the ‘Sound’ menu to set up the following adjustments. These will allow you to enhance your listening experience and expand the full capability of the television.

Standard	Default settings
Music	Emphasises music over voices
Movie	Provides live and full sound for movies
Sports	Emphasises sound for sports
Personal	Allows you to change the sound settings to your personal preference. These settings are saved automatically.

Off	Disables the DTS Studio Sound audio feature
On	Studio Sound creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialog.

OFF	Disables the DTS DRC feature.
ON	Adjusts the level of dynamic range for DTS movie soundtracks. Very loud sounds get quieter and quiet parts get louder. Recommended for midnight listening.

Digital Audio Output	Switch between Auto, PCM or RAW.
Digital Audio Delay	Delay the sound in relation to the picture on the digital output.
Audio Delay (ms)	Delay the sound in relation to the picture on the audio output (speaker, headphone, etc.)	Range: 0 - 250.

ON	When ‘ON’ is selected, the volume will attempt to stay at a constant level regardless of TV programme and advertisements.
OFF	Switches Auto Volume off.

ON	Switches Audio description on. AD Volume Control is activated.
OFF	Switches Audio Description off.

Channel menu

Terrestrial Digital Television
Cable Digital Television
Satellite Digital Television
Analogue Television

DVB Antenna	Selected input antenna type.
Auto Scan	Allows you to retune the television for all digital channels, digital radio stations and analogue devices.
Tuning Mode	Digital, Analogue and Digital + Analogue.
Auto Tuning	When selected, the set will start tuning.
Digital Manual Tuning	Allows you to manually tune your digital signal by selecting the channel number. Press [OK] to start.
Digital Smart Retuning	Enables the set to retune those channels already stored.
Auto Update Channel List	Can be set to “ON” or “OFF”.
HbbTV	Allows interactive services like BBC red button+ using Digital TV broadcasting when connected to the internet.
LCN	Logical Channel Number. When turned on, digital stations will be in order.
Standby Scan	When the TV is put into standby mode a standby scan will be performed, during this process the TV will scan for new channel information and automatically update the channel list if any changes are found, both the visual and audio functions will be off, once the scan is complete the TV will stay in standby mode.
CI Information	Pay per view services require a “Smartcard” to be inserted into the TV. If you subscribe to a pay per view service the provider will issue you with a ‘CAM’ and a “Smartcard”. The ‘CAM’ can then be inserted into the COMMON INTERFACE PORT (CI Card In).

Important: To receive Freeview/Saorview channels, in particular HD channels, you will need a Digital TV aerial and be in a good Freeview/Saorview coverage area. You can check the coverage for your area at www.freeview.co.uk or www.saorview.ie

Note: Any Freeview HD channels found during tuning will be placed in channel positions above 100. For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.

Note: Freeview channels are only available in the UK, Saorview channels are only available in the ROI.

Signal Information

Auto Scan	Allow the set to tune automatically into analogue stations.
Analogue Manual Tuning	Direct tuning of analogue stations.

Satellite Tuning:
Antenna Setup	Type of reception being received.
Channel Type	Allows only all channels, locked channels or free channels to be selected. Options are Free+Scramble, Scramble, Free
Service Type	All, Radio or DTV.
Scan Mode	Default, Network Scan or Blind Scan.
Auto Tune	Tunes the set automatically.
Auto Update Channel List	Enables the set to re-tune those channels already stored.
HbbTV	Allows interactive services using Digital TV broadcasting when connected to the internet.
LCN	Logical Channel Number. When turned on, digital stations will be in order.
CI Information	Pay per view services require a “Smartcard” to be inserted into the TV. If you subscribe to a pay per view service the provider will issue you with a ‘CAM’ and a “Smartcard”. The ‘CAM’ can then be inserted into the COMMON INTERFACE PORT (CI Card In).
Signal Information	Will show the condition of the received satellite signal.

Note: If channels are tuned in on satellite, other tuning modes are not possible.

NETWORK menu

Set up and control your network and internet access here. There are two ways to connect to your local network, in most cases this will be the router used to connect to the internet.

Network	Select the type of network connection – Ethernet (Cable) or Wi-Fi (Wireless).
Network Test	Allows the network connectivity to be tested.
Network Information	Gives information about your network.

Push Button Method	Select and requests to press button on router
Generate Security PIN	Select and PIN generated for router.

IPv4

Auto	This is also known as DHCP, use this setting to automatically set the IP address of your television via the router.
Manual	Manually set press [OK] when on function and then use arrow keys to manually edit setting.
IP	Set the IP address.
Netmask	Set the Netmask address.
Gateway	Set the Gateway address.
DNS	Set the DNS address.
OK	Press to enter options selected.
Disabled	Disable IPv4.

IPv6

Auto	This is also known as DHCP, use this setting to automatically set the IP address of your television via the router.
Manual	Press [OK] to edit, keypad is displayed to enter data. When finished select ‘enter’ and press [OK].
IP	Set the IP address.
Prefix	Adjust in the range 1 to 128 using the RIGHT/LEFT arrow buttons.
Gateway	Set the Gateway address.
DNS	Set the DNS address.
OK	Press to enter options selected.
Disabled	Disable IPv6.

Time Menu

Any time related function can be set or seen here.

Time:
Auto Sync	Turn on to synchronise the time to the incoming digital television signal. If connected to the internet, the clock will be updated from here. Turn off to set the clock manually.
Time Zone	Adjustment of the time offset. Use the [UP/DOWN] arrow buttons on the remote control to change the setting.
Daylight Savings	Cannot be set in Freeview mode as this information is taken from the Freeview transmission. Allows 1 hour offset from GMT.

On time	Allows you to set a specific time for your TV to turn on. Use arrow buttons to select the option and [OK] to set.
Input Source	Select the source which the television should turn on and display.
Digital Channel Type	Only applicable for DTV. TV, Radio or Data can be selected.
Channel	Use the [RIGHT/LEFT] arrow buttons to select number.
Volume	Sets volume which the set comes on at.

System Menu

Set up system control options in this menu.

Language

Menu Language	Set the language used in the on-screen display, menus etc.
Primary Audio Language	Set the audio track for Digital Television
Primary Subtitle Language	Set the on-screen subtitle language.

Note: Only languages which are being transmitted can be selected.

Lock

Lock	Set the lock function on your set.
Set Password	Set the audio track for Digital Television
Channel Lock	Set the on-screen subtitle language.
Parental Guidance	Set the parental guidance level.
The default password is “0000”

HDMI CEC

CEC Control	Turn on or off.
Device Auto Power Off	Enable automatic device power off when television turns off.
TV Auto Power On	Enable television turning on from standby when HDMI source powers up.
HDMI ARC	Turn ARC functionality on or off. ARC (Audio Return Channel) allows sound to be outputted via the HDMI connection. This can be fed into an audio device for an enhanced listening experience.
HDMI 2.0 Format Standard	Can only be selected when on HDMI input.
Detect	Show list of connected HDMI devices.

Advanced Settings

Disk	Displays the USB device.
Select Partition	Shows the partition being used.
Timeshift	Amount of memory allocated to time shifting – 512MB, 1GB, 2GB or 4GB.
Format	Format the connected device.
Speed Check	Check that the speed of the connected memory if okay.

About TV

Model	Model number of your set.
Software Version	Date of the software revision” to “Displays the software revision number and the date/time of revision.
Helpline Tel. Number	Your Blaupunkt Helpline telephone number.
Email Address	Your Blaupunkt Helpline email address.
Website	Blaupunkt website.
Online Manual	View the online Operating Instructions.

Software Update (USB)	Update the set
OAD	Initiate an Over Air Download
OAD Scan	Scan for an Over Air Download
Internet Update Check	Check for a network update.
NetReady Information	NetReady allows control of OTA updates.

ABOUT TV

Select other input data source from this menu:

Note: If you experience a playback issue, please ensure the files being used are the correct format (example - the picture plays but no sound) See the ‘Compatible file types for USB playback’ section at the rear of these Operating Instructions.

Note: If your smartphone or tablet does not include mirroring, it may be possible to connect a suitable cable from your device directly to one of the HDMI inputs on the rear of the TV. Suitable cables for your device should be available from a local electronics retailer.

Note: USB extension cables are not recommended as they can cause a reduction in picture/audio quality and stoppages during play back of USB content.

Media menu

Miracast (Screen mirroring)

Note: Many Android and Windows devices support screen mirroring. For Apple devices, you need a separate Apple TV box to allow screen mirroring onto non Apple products.

Note: If your smartphone or tablet does not include mirroring, it may be possible to connect a suitable cable from your device directly to one of the HDMI inputs on the rear of the TV. Suitable cables for your device should be available from a local electronics retailer.

Operating Instructions Advice

	This button will shift the character set on the keyboard to capital letters.
	Allows the selection of special characters.
	Backspace, deletes last character inputted.
	Insert a space
	Enters password and exits keyboard mode.
	Type of keyboard (ENG is English). This can not be changed.

Note: It is not recommended to connect external user interface devices, such as a keyboard or mouse, to this set.

Remote control

Key

1

2

3

4

TV Menu Operation

SETTINGS MENU

Quick Settings		Allows you to quickly access some of the most useful functions on the set.
Picture		Enables control of the picture settings to ensure optimal performance and personal preference settings to be stored.
Sound		Controls the individual sound settings on the television.
Channel		Set up your channels and tuning.
Network		Connection to your Wi-Fi or Ethernet network.
Time		Gives control over all the time and date functions on the set.
System		Provides access to the overall system controls within the television.
About TV		Shows relevant information about the set and its functions.

Quick settings menu

Audio Track	Allows you to choose between the audio channels being transmitted on Digital Television. Currently for Freeview only normal sound or the Audio Description audio channels can be selected.
Subtitle	Turn subtitles on and off.
Subtitle Track	Appears when Subtitles (above) are turned on and allows you to select which subtitle track is to be used. There may be more than one sub-title available for use, i.e. English Subtitle or Hearing Impaired subtitle.
Teletext	Turn Teletext on or off. This can also be achieved by pressing the [Teletext] button on the remote control.
Record List	Shows a list of recorded TV programmes via a connected USB memory stick or USB hard drive. While in the ‘Recorded List’, press the [BLUE] button to access the ‘Schedule List’. Refer to the ‘USB RECORD’ page for further information.
Schedule List	The schedule list allows you to view your reminders and recordings. There are two icons, the clock symbol denotes a reminder, the camera indicates a recording. To select use the [UP] and [DOWN] arrow buttons.

Playback files from Record list

Press [RED] to delete a selected recording.
Press [GREEN] to sort the items in the record list by date.
Press [YELLOW] to sort the items in the record list by name.
Press [BLUE] to enter the schedule list.

Note: Recording is only possible when a USB stick is plugged in and formatted at FAT32. VIsit the ‘USB RECORDING’ page for more information.

Picture Menu

For complete control of your picture settings, enter the ‘Picture’ menu to set up the following adjustments. These will allow you to enhance your viewing experience and utilise the full capability of the television.

Economy	Power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel). In Economy mode, the TV will switch itself to Standby mode after 3-5 hours in the event that the TV buttons or remote control buttons are not pressed (change the picture mode to another setting to de-activate this function) In the economy mode the brightness of the picture may be reduced.
Standard	Standard settings
Personal	Allows you to change the picture settings to your personal preference. These settings are saved automatically.
Dynamic	Recommended settings for fast moving pictures.
Movie	Picture has less colour and is darker.

Standard	Default settings.
Warm	Increases red within the picture.
Personal	Your own settings.
Cold	Increases blue within the picture.

Noise Reduction	Off, Low, Medium, High.
Gamma	Changes the range of the colour reproduction. Low, Medium and High.
Active Contrast	Allows for the contrast level to be adjusted automatically depending on picture content. ‘ON’ or ‘OFF’.
Backlight	Switches optimization of the backlight and contrast of the picture.	Range: 1-100
Red	Adjust the amount of red in the picture.	Range: 1-100
Green	Adjust the amount of green in the picture.	Range: 1-100
Blue	Adjust the amount of blue in the picture.	Range: 1-100
CMS Hue	This is a standard to adjust the colour either more reddish or more bluish in tone. R/G/B/C/M	Range: -63 to 63
CMS Value	A higher value makes the image brighter. A lower value makes the image darker. R/G/B/C/M	Range: -32 to 31
CMS Saturation	Increases or decreases the saturation of a selected colour. R/G/B/C/M	Range: 0 to 15

Auto
16:9
4:3
Zoom 1
Zoom 2

Expert Settings

Use these adjustment settings to improve the picture in more detail.

Noise Reduction	Off, Low, Medium, High.
Gamma	Changes the range of the colour reproduction. Low, Medium and High.
Active Contrast	Allows for the contrast level to be adjusted automatically depending on picture content. ‘ON’ or ‘OFF’.
Backlight	Switches optimization of the backlight and contrast of the picture.	Range: 1-100
Red	Adjust the amount of red in the picture.	Range: 1-100
Green	Adjust the amount of green in the picture.	Range: 1-100
Blue	Adjust the amount of blue in the picture.	Range: 1-100
CMS Hue	This is a standard to adjust the colour either more reddish or more bluish in tone. R/G/B/C/M	Range: -63 to 63
CMS Value	A higher value makes the image brighter. A lower value makes the image darker. R/G/B/C/M	Range: -32 to 31
CMS Saturation	Increases or decreases the saturation of a selected colour. R/G/B/C/M	Range: 0 to 15

SOUND MENU

For complete control of your audio settings, enter the ‘Sound’ menu to set up the following adjustments. These will allow you to enhance your listening experience and expand the full capability of the television.

Standard	Default settings
Music	Emphasises music over voices
Movie	Provides live and full sound for movies
Sports	Emphasises sound for sports
Personal	Allows you to change the sound settings to your personal preference. These settings are saved automatically.

Off	Disables the DTS Studio Sound audio feature
On	Studio Sound creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialog.

OFF	Disables the DTS DRC feature.
ON	Adjusts the level of dynamic range for DTS movie soundtracks. Very loud sounds get quieter and quiet parts get louder. Recommended for midnight listening.

Digital Audio Output	Switch between Auto, PCM or RAW.
Digital Audio Delay	Delay the sound in relation to the picture on the digital output.
Audio Delay (ms)	Delay the sound in relation to the picture on the audio output (speaker, headphone, etc.)	Range: 0 - 250.

ON	When ‘ON’ is selected, the volume will attempt to stay at a constant level regardless of TV programme and advertisements.
OFF	Switches Auto Volume off.

ON	Switches Audio description on. AD Volume Control is activated.
OFF	Switches Audio Description off.

Channel menu

Terrestrial Digital Television
Cable Digital Television
Satellite Digital Television
Analogue Television

DVB Antenna	Selected input antenna type.
Auto Scan	Allows you to retune the television for all digital channels, digital radio stations and analogue devices.
Tuning Mode	Digital, Analogue and Digital + Analogue.
Auto Tuning	When selected, the set will start tuning.
Digital Manual Tuning	Allows you to manually tune your digital signal by selecting the channel number. Press [OK] to start.
Digital Smart Retuning	Enables the set to retune those channels already stored.
Auto Update Channel List	Can be set to “ON” or “OFF”.
HbbTV	Allows interactive services like BBC red button+ using Digital TV broadcasting when connected to the internet.
LCN	Logical Channel Number. When turned on, digital stations will be in order.
Standby Scan	When the TV is put into standby mode a standby scan will be performed, during this process the TV will scan for new channel information and automatically update the channel list if any changes are found, both the visual and audio functions will be off, once the scan is complete the TV will stay in standby mode.
CI Information	Pay per view services require a “Smartcard” to be inserted into the TV. If you subscribe to a pay per view service the provider will issue you with a ‘CAM’ and a “Smartcard”. The ‘CAM’ can then be inserted into the COMMON INTERFACE PORT (CI Card In).

Important: To receive Freeview/Saorview channels, in particular HD channels, you will need a Digital TV aerial and be in a good Freeview/Saorview coverage area. You can check the coverage for your area at www.freeview.co.uk or www.saorview.ie

Note: Any Freeview HD channels found during tuning will be placed in channel positions above 100. For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.

Note: Freeview channels are only available in the UK, Saorview channels are only available in the ROI.

Signal Information

Auto Scan	Allow the set to tune automatically into analogue stations.
Analogue Manual Tuning	Direct tuning of analogue stations.

Satellite Tuning:
Antenna Setup	Type of reception being received.
Channel Type	Allows only all channels, locked channels or free channels to be selected. Options are Free+Scramble, Scramble, Free
Service Type	All, Radio or DTV.
Scan Mode	Default, Network Scan or Blind Scan.
Auto Tune	Tunes the set automatically.
Auto Update Channel List	Enables the set to re-tune those channels already stored.
HbbTV	Allows interactive services using Digital TV broadcasting when connected to the internet.
LCN	Logical Channel Number. When turned on, digital stations will be in order.
CI Information	Pay per view services require a “Smartcard” to be inserted into the TV. If you subscribe to a pay per view service the provider will issue you with a ‘CAM’ and a “Smartcard”. The ‘CAM’ can then be inserted into the COMMON INTERFACE PORT (CI Card In).
Signal Information	Will show the condition of the received satellite signal.

Note: If channels are tuned in on satellite, other tuning modes are not possible.

NETWORK menu

Set up and control your network and internet access here. There are two ways to connect to your local network, in most cases this will be the router used to connect to the internet.

Network	Select the type of network connection – Ethernet (Cable) or Wi-Fi (Wireless).
Network Test	Allows the network connectivity to be tested.
Network Information	Gives information about your network.

Push Button Method	Select and requests to press button on router
Generate Security PIN	Select and PIN generated for router.

IPv4

Auto	This is also known as DHCP, use this setting to automatically set the IP address of your television via the router.
Manual	Manually set press [OK] when on function and then use arrow keys to manually edit setting.
IP	Set the IP address.
Netmask	Set the Netmask address.
Gateway	Set the Gateway address.
DNS	Set the DNS address.
OK	Press to enter options selected.
Disabled	Disable IPv4.

IPv6

Auto	This is also known as DHCP, use this setting to automatically set the IP address of your television via the router.
Manual	Press [OK] to edit, keypad is displayed to enter data. When finished select ‘enter’ and press [OK].
IP	Set the IP address.
Prefix	Adjust in the range 1 to 128 using the RIGHT/LEFT arrow buttons.
Gateway	Set the Gateway address.
DNS	Set the DNS address.
OK	Press to enter options selected.
Disabled	Disable IPv6.

Time Menu

Any time related function can be set or seen here.

Time:
Auto Sync	Turn on to synchronise the time to the incoming digital television signal. If connected to the internet, the clock will be updated from here. Turn off to set the clock manually.
Time Zone	Adjustment of the time offset. Use the [UP/DOWN] arrow buttons on the remote control to change the setting.
Daylight Savings	Cannot be set in Freeview mode as this information is taken from the Freeview transmission. Allows 1 hour offset from GMT.

On time	Allows you to set a specific time for your TV to turn on. Use arrow buttons to select the option and [OK] to set.
Input Source	Select the source which the television should turn on and display.
Digital Channel Type	Only applicable for DTV. TV, Radio or Data can be selected.
Channel	Use the [RIGHT/LEFT] arrow buttons to select number.
Volume	Sets volume which the set comes on at.

System Menu

Set up system control options in this menu.

Language

Menu Language	Set the language used in the on-screen display, menus etc.
Primary Audio Language	Set the audio track for Digital Television
Primary Subtitle Language	Set the on-screen subtitle language.

Note: Only languages which are being transmitted can be selected.

Lock

Lock	Set the lock function on your set.
Set Password	Set the audio track for Digital Television
Channel Lock	Set the on-screen subtitle language.
Parental Guidance	Set the parental guidance level.
The default password is “0000”

HDMI CEC

CEC Control	Turn on or off.
Device Auto Power Off	Enable automatic device power off when television turns off.
TV Auto Power On	Enable television turning on from standby when HDMI source powers up.
HDMI ARC	Turn ARC functionality on or off. ARC (Audio Return Channel) allows sound to be outputted via the HDMI connection. This can be fed into an audio device for an enhanced listening experience.
HDMI 2.0 Format Standard	Can only be selected when on HDMI input.
Detect	Show list of connected HDMI devices.

Advanced Settings

Disk	Displays the USB device.
Select Partition	Shows the partition being used.
Timeshift	Amount of memory allocated to time shifting – 512MB, 1GB, 2GB or 4GB.
Format	Format the connected device.
Speed Check	Check that the speed of the connected memory if okay.

About TV

Model	Model number of your set.
Software Version	Date of the software revision” to “Displays the software revision number and the date/time of revision.
Helpline Tel. Number	Your Sharp Helpline telephone number.
Email Address	Your Sharp Helpline email address.
Website	Sharp website.
Online Manual	View the online Operating Instructions.

Software Update (USB)	Update the set
OAD	Initiate an Over Air Download
OAD Scan	Scan for an Over Air Download
Internet Update Check	Check for a network update.
NetReady Information	NetReady allows control of OTA updates.

ABOUT TV

Select other input data source from this menu:

Note: If you experience a playback issue, please ensure the files being used are the correct format (example - the picture plays but no sound) See the ‘Compatible file types for USB playback’ section at the rear of these Operating Instructions.

Note: If your smartphone or tablet does not include mirroring, it may be possible to connect a suitable cable from your device directly to one of the HDMI inputs on the rear of the TV. Suitable cables for your device should be available from a local electronics retailer.

Note: USB extension cables are not recommended as they can cause a reduction in picture/audio quality and stoppages during play back of USB content.

Media menu

Miracast (Screen mirroring)

Note: Many Android and Windows devices support screen mirroring. For Apple devices, you need a separate Apple TV box to allow screen mirroring onto non Apple products.

Note: If your smartphone or tablet does not include mirroring, it may be possible to connect a suitable cable from your device directly to one of the HDMI inputs on the rear of the TV. Suitable cables for your device should be available from a local electronics retailer.

First Time Installation

Note These screens only come up if more than one region is found. i.e. two or more transmitters are tuned in.

Note: In Home Mode, the TV will switch itself to the standby mode after 4 hours in the event that the buttons on the remote control or TV set are not used. This can be disabled in the ‘TIME’ menu.
Store Mode: For store display use. The picture is adjusted to optimum settings. The store demonstration will appear on the screen automatically after two minutes.

Wall Mounting and Set Security

Securing the TV to a wall

Note: Please ensure that children do not climb on or near the TV set.

Note: When handling the set do not grip the LCD Panel.

Note: Do not pull the set when mounted on a bracket. If using a moveable bracket, adjust via the bracket and not the set.

Wall mounting

Important: If wall mounting this TV, only use the screws already provided in the wall mounting holes.

Important: If wall mounting this TV, only use the screws already provided in the wall mounting holes. Using other screws which are longer could cause irreparable damage to internal parts. When using a wall bracket, please ensure the screws in the back of the TV set are not over tightened.

Note: the wall bracket type shown in the diagram is for illustration purposes only, other brackets may be used and it is recommended that the spacers and screws are tested to see if they fit correctly before final assembly.

Important: Only use the screws provided to mount the set onto a wall bracket. When using a wall bracket, please ensure the screws in the back of the TV set are not over tightened. Failure to use the correct screws may lead to damage.

Note: Spacers and screws are not supplied for all models, refer to the Quick Start Guide for more information.

Note: Due to the use of rear facing HDMI connectors, right angled HDMI adapters can be utilized to reduce the space required behind the set to allow the cable to bend safely. There are different types of HDMI angled connectors, ensure that the one being used is suitable for the cable/socket types.

TV control stick and input source

TV Control Stick

Press the centre of the control stick once - Power on the TV set

RIGHT/LEFT – volume up/volume down
UP/DOWN – changes channel up/dow
Press the centre of the control stick once – displays the menu
• Press and hold the centre of the control stick – Standby/Power Off

RIGHT/LEFT/UP/DOWN – navigation of cursor in on-screen menus
Press the centre of the control stick once – OK/Confirm selected item
Press and hold the centre of the control stick – back to previous menu

Choosing Mode Input/Source

Press [SOURCE] - The ‘source’ menu will appear
Press [<] or [>] to select the input you require.
Press [OK].

Press the centre of the control stick once to enter the TV menu.
Press the control stick RIGHT/LEFT and navigate through to ‘SOURCE’ menu.
Press the centre of the control stick to enter the ‘SOURCE’ menu.
Press the control stick RIGHT/LEFT to scroll through and select the input/source you require.
Press the centre of the control stick to select the chosen input/source option highlighted.

Source menu

	Digital TV	Select this input to watch Digital Television from your local transmitter. The set must be tuned into watch programmes. Refer to the ‘Channel’ menu section of these Operating Instructions for information on how to tune your set into digital channels.
	DVB-S	Satellite tuner input. If a satellite aerial is connected and the set tuned to these channels, select this input to view them.
	HDMI 1	First HDMI input.
	HDMI 2	Second HDMI input.
	HDMI 3	Third HDMI input.
	Component	Y/Pb/Pr input. Audio is connected to the set via the AV input connector.
	SCART	SCART input connectivity.
	AV	Component input. Audio is connected to the set via the AV input connector.
	Analogue	Analogue tuner input.

Note: Inputs may vary depending on your television specification.

Note: If the inputs have been renamed, they will not appear as shown above.

7 day TV guide and channel list

Freeview Play

	To be recorded on Catch Up.
	Already recorded on Catch Up.
Catch Up is only applicable to sets with Freeview Play.

Note: Freeview HD channels found during tuning will be placed in channel positions above 100, for example, 101 - BBC 1 HD, 102 - BBC 2 HD etc.

Watch Now	Only applicable when the play symbol shows up, will play back via the on-demand player.
More Details	View further information about the programme highlighted.
Record	Will allow you to set a recording for this time.
Reminder	Will allow you to set a reminder for this time.

Non-Freeview Play 7 Day Guide

Note: Record functions are only applicable to sets with a built in USB Record/PVR function.

Note: When the TV set is on, a reminder message will be displayed informing you that a programme is about to start. If the set is in standby, then it will turn on at the reminder time.

Note: When recording in standby mode, the set will not turn on. While recording in standby, the light on the front of the set will ﬂash.

Freeview play APP

Only applicable to sets with Freeview Play.

Note: To use the full functionality of Freeview Play your set must be connected to the internet.

Note: Some apps require additional registration, this is a simple process and it will inform you of the correct website to visit to complete the registration.

Catch Up tv

Note: Areas receiving Saorview transmissions will not support catch up services.

Access the Freeview play app by pressing the [FREEVIEW PLAY] button.
Access the 7 day TV guide by pressing the [RED] button.

CHANNEL LIST

Favorite	Add a channel to your favorite list by pressing [OK] when on the desired channel. Press again to remove from favorite list. Favorites can be selected in normal Digital Television mode by pressing the [FAV] button.
Skip	When in the Digital Television mode, and using the Channel +/- buttons, the selected channel will be skipped. Select a channel to be skipped by pressing the [OK] button, to deselect press the [OK] button again.
Delete	Permanently delete channel. Can only be recovered by retuning. To select a channel for deletion, press the [OK] button.
Lock	Will only appear when lock is enabled in lock menu. Locks the channel that you are on.

Note: If channels are moved or deleted, any settings made to record on that channel will not work.

Applications menu

Applications Guide

Note:The position of apps may vary depending on your TV set.

Note:The applications available will be different depending if the set is a Freeview Play model. Refer to the application list.

Note: HDR is supported on apps such as Netflix and YouTube, and only works if the data being streamed contains HDR data.

Applications menu

Applications Available on Freeview Play Models
Netflix	Allows access to films, boxsets and other streaming videos via your Netflix account. Note that you will have to set up your own Netflix account to access this application as subscription is not included with the set.
BBC iPlayer	Enjoy BBC iPlayer exclusives and your favourite BBC programmes from the last 30 days.
YouTube	Video sharing website allows you to discover, watch and share originally created videos.
BBC News	Access the BBC News app for up-to-the-minute and breaking news reports.
BBC Sport	The BBC Sport app offers the latest sports news, live action and scores.
Smart Portal	More appliations.
ITV Player	The ITV Hub, new home of ITV on demand. Enjoy the best telly anytime, anywhere.
Channel 4 (All 4)	The latest ‘‘Catch Up’’ plus a huge library of shows from 4, which includes complete box sets.
Demand 5	Watch full episodes of your favourite Channel 5 programmes when it suits you.
UK Play TV	‘‘Catch Up’’ on your favourite Dave, Really, Yesterday and Drama shows with Freeview Play Access the Freeview Play app. Please see the ‘FREEVIEW PLAY’ App page for further information.

Applications Available on Non-Freeview Play Models
Netflix	Allows access to films, boxsets and other streaming videos via your Netflix account. Note that you will have to set up your own Netflix account to access this application as subscription is not included with the set.
BBC iPlayer	Enjoy BBC iPlayer exclusives and your favourite BBC programmes from the last 30 days.
YouTube	Video sharing website allows you to discover, watch and share originally created videos.
BBC News	Access the BBC News app for up-to-the-minute and breaking news reports.
BBC Sport	The BBC Sport app offers the latest sports news, live action and scores.
Smart Portal	More applications.

Web Browser	Application for accessing websites via the internet. Use the following buttons for navigation in the browser:
CH+	Scroll page up
CH-	Scroll page down
Red Button	Show/hide browser menu bar
Yellow Button	Zoom in
Blue Button	Zoom out

Note: Some Apps, such as Netflix, require a monthly subscription. This is not included with the purchase of your TV set.

Note: The appearance and functionality of apps may vary depending upon the revision of the app and the platform it is designed to be used on. On-demand players may also change depending upon the region in which the set is tuned into.

USB recording

Freeview and Saorview only

Pause live TV and then playback, rewind and fast forward (up to live TV).
One button record, if you decide you want to record the current programme.
Easy recording from the 7 Day TV Guide.

Recommended Minimum Specification - USB Memory Stick

Read Speed	20 Mb/s (Megabits Per Second)	If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear of this user guide.
Write Speed	6 Mb/s (Megabits Per Second)

Note: When you switch the TV to standby or change channel the ‘Time Shift’ memory is wiped. To restart time shift you must press [PLAY/PAUSE] button.

Note: If channels are moved or deleted, then the USB Record/PVR will not function correctly.

Note: This television contains one TV tuner, therefore it can only record the channel you are watching or record one channel while the television is in standby mode.

Note: USB Record/PVR record function is only available in Digital/Freeview TV mode. Due to copyright laws and illegal copying/recording it is not possible to record to/from any other input/output source.

Note: Recorded content can only be played back on the device that recorded it. It is not permitted (or possible) to watch content recorded on the TV from Freeview/Saorview on another device.

One Button Record

Note: Record functions are only applicable to sets with the built in USB Record/PVR function.

USB & DNLA Media Types

Media	Codec	Resolution	Bit Rate	File Extension
Film	MPEG1/2	1080P@60fps	80Mbps	".DAT, .VOB, .MPG, .MPEG,.ts, .trp, .tp, .mp4, .mov, .3gpp, .3gp, .avi, .mkv, .asf"
	MPEG4	1080P@60fps	40Mbps	".MPG, .MPEG, .mp4, .mov, .3gpp, .3gp, .avi"
	XviD	1080P@60fps	40Mbps	.divx, .mp4, .mov, .avi, .mkv, .asf
	H.263	1080P@60fps	40Mbps	".mp4, .mov, .3gpp, .3gp, .av, .mkv"
	H.264	"4096x2160@30fps 1080P@60fps"	135Mbps	".ﬂv, .mp4, .mov, .3gpp, .3gp, .ts, .trp, .tp, .asf, .wmv, .avi, .mkv"
	Motion JPEG	1080P@30fps	10Mbps	".avi, .3gpp, .3gp, .mp4, .mov, .mkv, .asf"
	VP8	1080P@60fps	20Mbps	.mkv, .webm
	HEVC	4K2K@60fps	100Mbps	.mp4, .mov, .mkv, .ts, .trp, .tp
	VP9	4K2K@60fps	100Mbps	.mkv, .webm
Media	Codec	Frequency	Bit Rate	File Extension
Music	MPEG1/2 Layer1, 2, 3	16KHz ~ 48KHz	32Kbps ~ 320Kbps	".mp3, .avi, .as, .mkv, .ts, .trp, .tp, .DAT, .VOB, .MPG, .MPEG, .wav"
	AC3	"32KHz, 44.1KHz, 48KHz"	32Kbps ~ 640Kbps	".ac3, .avi, .mkv, .divx, .3gpp, .3gp, .mp4, .mov, m4a, .ts, .trp, .tp, .DAT, .VOB, .MPG, .MPEG, .rm, .rmvb"
	EAC3	"32KHz, 44.1KHz, 48KHz"	32Kbps ~ 6Mbps	".ec3, .3gpp, .3gp, .mp4, .mov, m4a, .ts, .trp, .tp, .DAT, .VOB, .MPG, .MPEG"
	AAC, HEAAC	8KHz ~ 48KHz	128bps ~ 320Kbps	".aac, .avi, .mkv, .divx, .3gpp, .3gp, .mp4, .mov, m4a, .ts, .trp, .tp, .DAT, .VOB, .MPG, .MPEG, . v, .rm, .rmvb"
	VORBIS	Up to 48KHz		".mkv, .webm, .3gpp, .3gp, .mp4, .mov, m4a, .ogg"
	DTS	Up to 48KHz	< 1.5Mbps	".ts, .trp, .tp, .DAT, .VOB, .MPG , .MPEG, .mkv"
	FLAC	8KHz~96 KHz	< 1.6Mbps	.mkv, . ac
Media		Resolution		File Extension
Photo	JPEG	15360x8640, (1920x8 x 1080x8)	Base-line	.jpg/.jpeg
	JPEG	1024x768	Progressive	.jpg/.jpeg
	PNG	9600x6400	Non-interlace	.png
	PNG	1200x800	Interlace	.png
	BMP	9600x6400		.bmp
	MPO	15360x8640, (1920x8 x 1080x8)	Base-line	.mpo
	MPO	1024x768	Progressive	.mpo
	GIF	6400x4800		.gif

Quick Lookup: Speciﬁcations - USB & DNLA Media Types

Internal Subtitle	File Extension	Container	Subtitle Codec
	.mp4	MP4	DVD Subtitle, UTF-8 Plain Text
	.mkv	MKV	"ASS, SSA, UTF-8 Plain Text, VobSub, DVD Subtitle"
	.avi	AVI(1.0, 2.0)	XSUB, XSUB+
External Subtitle	File Extension	Subtitle Parser	Remark
	.srt	SubRip
	.ssa/ .ass	SubStation Alpha
	.smi	SAMI
	.sub	SubViewer, Micro DVD, DVD Subtitle System, Subldx (VobSub)	SubViewer 1.0 & 2.0 Only
	.txt	TMPlayer

Connections

Note: The TV input/output connections and connecting cables on these pages are shown for reference. Cables are available separately from your retailer. Not all connections are available on all TV models.

Connecting to a device with Composite AV/Video output

Connecting to an external audio device (Amplifier, Surround Sound, Sound Bars etc)

Note: When connecting an external audio device to the TV, set the TV volume to a higher than normal level, you will then be able to use your device remote control to adjust the volume of the connected device to suit your requirements.

Connecting to a device with HDMI output

Connecting to a device with RF output (CCTV or other Analogue devices)

Note: You will need to manually tune your device into an analogue channel.

Connecting an Ethernet/Network cable

Connecting to a USB device

Note: Tablets and/or phones can be charged via the USB port, however, it’s not possible to play back media from these devices.

Note: Some USB devices may need to be connected to an external power supply before being used with this input, i.e. powered hard drive.

Connecting the TV to Earphones

Troubleshooting guide

General	I would like to have louder sound by connecting additional speakers or a Soundbar.	1) Use either the 3.5mm headphone output on the TV and a 3.5mm to phono cable (available separately) to connect to an amplifier/surround sound/soundbar. Please note this will deactivate the TV’s built in speakers. or: 2) Connect a digital optical audio cable from the TV’s digital optical audio output to your amplifier/surround sound/soundbar digital optical audio input.
General	Why are some options in the menu unavailable and greyed out.	Some options are only available in certain inputs/sources, i.e. HDMI. They are unavailable in the other sources where they have no effect.
General	Can I stop my TV automatically turning off after 4hrs?	Yes, in the ‘Time’ menu settings, scroll down to Auto Standby and select OFF.
TV	I have tuned in Digital TV but I am not receiving any or all of the channels and/or the channels I receive are breaking up.	1) Check you are in an area that can receive Freeview/Saorview, visit www.freeview.co.uk or www.saorview.ie 2) Check you are using an aerial that is able to receive a good digital signal. In most cases, you will need an outdoor digital hi-gain/wideband aerial. In areas that have excellent digital coverage, you may be able to use a loft type aerial but it is highly likely that you will also need to connect a booster between the back of the TV and the TV aerial wall socket. Unfortunately, to receive a good enough digital signal, it is not possible to use a portable/indoor type aerial.
TV	I have re-tuned my television but when I switch it off it is not storing the channels.	If the TV does not save the channels when you power it off, it’s likely the channel database has become corrupt. 1) Turn off the TV. 2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again. 3) Using the remote control, press [MENU] followed by 8-8-8-8 to enter the initial setup/first time installation menu. 4) Press OK (let the TV run the full tuning process). 5) Once completed, turn off the TV, reconnect the RF/Aerial cable then turn the TV back on again. 6) Repeat steps 3 & 4.
VCR/DVD Recorder	I have connected the TV to my VCR or DVD Recorder via SCART but it is not recording.	In addition to connecting via SCART, you should connect the aerial cable from the wall socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to the TV.
Game Consoles	I have connected my Playstation/Xbox to the TV via HDMI, but I am not receiving any pictures or sound on my Television.	1) Ensure the TVs’ source is set to HDMI. 2) Check your settings on your Playstation/Xbox are as per the Playstation/Xbox instruction manual.
Game Consoles	I have connected my Playstation/Xbox to the TV via Component cables (red, green & blue) but I am not receiving any sound.	Component cables only provide HD pictures. For the sound you will need to connect the red & white audio cables on the Playstation/Xbox to the red & white Phono inputs (or mini AV input where fitted) on the rear of the TV. Please refer to the ‘Connections’ pages.
System Lock	I have changed the password on the television and now forgotten it.	There is a master password of 4711, to gain access to the TV menu and reset the normal password.
USB Mode	I have inserted a USB Memory Key, but the TV does not recognise it.	Ensure the USB Memory Key is formatted to type FAT32.
USB Mode	Using a USB portable hard drive / larger than 32GB.	If you wish to use a portable hard drive larger than 32GB, please note that it must be formatted to the FAT32 file system in order to operate on this TV. Windows XP/Vista computers are only capable of formatting up to 32GB, therefore, you will need a software programme/utility to format larger hard drives. Please refer to the website, www.umc-uk.co.uk, for more information.
DVD (For TV models with DVD only)	I have inserted a disc but it is not playing.	1) Ensure you have inserted the disc facing the correct way. 2) Ensure the disc is clean and is not scratched. 3) Some copied discs will not play. 4) Check the DVD is a region 2 disc – to change the region of the DVD player, refer to www.umc-uk.co.uk, select ‘Changing DVD Region’ in the ‘Product Support’ section
DVD (For TV models with DVD only)	I have pressed the eject button but the disc is not coming out.	To eject the disc hold the stop/eject button for 4 seconds.
USB Record (For TV models with USB record only)	I cannot change the channel, access the menu or use the red button.	During time shift you cannot change the channel, access the menu or use the red button.
USB Record (For TV models with USB record only)	When using the USB to record the picture ‘breaks up’ or experience loss of sound.	Check the USB memory stick meets the minimum read speed requirements. Standard definition channels require a read speed of 20 Mb/s (Megabits per second) and a write Speed of 6 Mb/s (Megabits per second) HD channels require the read speed of 80 Mb/s (Megabits per second) and a write speed of 40 Mb/s (Megabits per second). USB 3.0 sticks should be used where possible.
Freeview HD	I cannot access all Freeview channels.	Some data channels for Freeview can only be obtained when the TV’s ethernet port is connected to your router.
Freeview HD	I cannot find the Freeview HD channels.	Freeview HD channels found during tuning will be placed in channel positions above 100. For example, 101 (BBC1 HD), 102 (BBC2 HD) etc.

UPDATING SOFTWARE

Note: If your set is outside of guarantee and the installation of the software causes a different issue you may be liable for a chargeable repair service. The reason for this is because you may have an inherent fault which can cause corruption on one of the boards when installing the software. This could result in your unit locking into SAFE mode whereby it is stuck in standby. This is not a fault with the software, this would be caused by an existing faulty board that would have required a repair.

Note: For further support with software updates, contact our technical support team or refer to the ‘Product Support’ section of the website. If the TV is using the newest software available it will not attempt to update the software.

OTA	Over the internet update. You will be notified when an OTA update is available for your set. When the software is downloading and then updating, do not power down the set. This will interrupt the process and may corrupt the set.
USB	Software can be uploaded onto your set via a USB stick. Only use software recommended by the manufacturer for this.
OAD	Over Air Download. Similar to OTA, but data is sent to the set via the Digital Television system.