E-instruction manual Language: English

home back

Network & internet

Network & Internet control and access is located in the Settings menu. To enter this menu option, select the icon while on the Home Page or press the [MENU] button on the remote control when in television mode, then go to Settings > Network & Internet. When selected, the options shown below are available:

Connecting to a Network
Connecting to a Network Using a LAN Cable

A wired LAN connection allows you to access the Internet and your home network, this is the recommended method of connection as it allows for reliable and fast connection to your network. This is also known an as an Ethernet cable connection or RJ45.
When connecting your router to the set via a cable, use the ethernet port on the rear of the television. After connecting the LAN cable, your set should connect to the internet automatically if DHCP is activated on your router. To set up your router you will have to refer to the instruction manual that was supplied with the device or talk to your broadband supplier.
If you need to set up a static IP address for the television, you will need to follow these steps:

  1. Press the [HOME] button, then select Settings > Network & Internet > IP settings > Static.
  2. Now follow the on-screen instructions and fill in correct IP Address, Gateway, Network prefix length and DNS.
Connecting to a Wi-Fi Network

The built-in Wi-Fi device allows you to access the Network and enjoy the benefits of networking in a cable-free environment.

  • Set up your Wi-Fi router. For details, refer to the instruction manual of your Wi-Fi router.
  • Press the [HOME] button, then select Settings > Network & Internet.
  • From the list of available networks choose your network. If you do not see your Wi-Fi network, select “See all” option to show the complete list of all available networks.
  • On the virtual keyboard enter password of your network and select [OK].
  • Your set will now automatically connect to the selected Wi-Fi network.