E-instruction manual Language: English

home back

Tuning in digital channels

It is possible to tune into terrestrial, cable and satellite digital television signals on your television set. To do this, follow the instructions given below for each type of signal input.

Terrestrial

Before tuning terrestrial channels, ensure the television is in TV mode:

  1. Press the [HOME] button, then select Settings > Channel > Channel installation mode.
  2. Select option Antenna.
  3. To start automatic channel scan press the [HOME] button, then select Settings > Channel > Channels > Channel scan.

After tuning into Freeview, you may be presented with a choice of regions; this is dependent upon your location and the number of transmissions received. Normally there will only be one transmitter:

  • Region 1 - Country
  • Region 2 - Transmitter Location
  • Region 3 -Local News variation
Cable

Receiving cable digital broadcast;

  1. Before tuning cable channels, ensure the television is in cable mode:
  2. Press the [HOME] button, then select Settings > Channel > Channel installation mode.
  3. Select option Cable.
  4. To start automatic channel scan, press the [HOME] button, then select Settings > Channel > Channels > Channel scan.
Satellite

Before tuning satellite channels, ensure the television is in satellite mode:

  1. Press the [HOME] button, then select Settings > Channel > Channel installation mode.
  2. Select option Preferred Satellite if you want to tune one of satellites preferred in your country.
  3. Select option General Satellite to get possibility to tune any satellite.
  4. To start automatic channel scan, press the [HOME] button, then select Settings > Channel > Channels > Satellite Re-scan.
  5. Choose the Satellite you wish to tune.
  6. Select Scan and press [OK].

Note: You can only tune into one type of digital television signal.