Before tuning cable channels, ensure the TV is in cable mode:
1.Press the HOME button, then select [Settings] — [Channel] — [Channel installation mode]
2.Select option [Cable]
To start automatic channel scan please:
•Press the HOME button, then select [Settings] — [Channel] — [Channels] — [Channel scan]
•Configure settings for cable tuning.
[Scan Mode]
Choose way how channels will be scanned. There are 3 options:
[Advance] – Insert Frequency and Network ID values provided by your cable operator.
If you set Frequency to Auto, TV will scan only predefined frequencies of operators until homing channel is found. Then based on homing channel information, remaining channels will be quickly tuned.
[Quick] - Insert Frequency and Network ID values provided by your cable operator.
If you set Frequency to Auto, TV will scan all frequencies from lowest to highest until homing channel is found. Then based on homing channel information, remaining channels will be quickly tuned.
[Full] – Slowest option for cable tuning. It will scan channels on all frequencies.
[Channel Scan Type]
Choose whether you want to tune all channels or digital channels only.
[Frequency]
Put here frequency provided by your cable operator.
If you wish to set [Frequency] to [Auto], you must delete current value in [Frequency] field via virtual keyboard and confirm.
[Network ID]
Put here Network ID provided by your cable operator.
If you wish to set [Network ID] to [Auto], you must delete current value in [Network ID] field via virtual keyboard and confirm.
•Select [Scan] and press OK to start tuning