To start channel scanning via satellite, follow the steps below:
1.Press the XXX.GST (Quick Settings) button, then select [All settings] > [Channels and inputs] > [Channels] > [Channel Scan].
2.Select [Tuner Mode] and choose [Satellite] to ensure that satellite channels are tuned.
3.Select [Satellite Auto Scan].
4.Select your satellite operator from the list of operators. If you want to tune a general satellite, such as ASTRA 19.2E, select [Others].
5.If you selected your operator and your CAM is inserted in the TV, all channels will be tuned automatically.
6.If you selected [Others], a list of satellites and transponders will be displayed.
The left column shows the list of satellites. Select the satellite you want to tune. The selected satellite is marked with a tick.
The middle column shows the list of transponders for the satellite selected in the left column. You can select one or more transponders to tune. Selected transponders are marked with a tick.
To tune the whole satellite, select only the satellite and do not select any transponders. To tune only specific transponders, do not select the satellite; select only the transponders you want to tune.
In the right column, you can configure detailed settings to match your satellite system, such as Unicable, DiSEqC and other related options.
When you have finished adjusting the settings, press the BLUE button on the remote control to start tuning channels.
Control options on the [Satellite Tune] screen:
RED button – Deletes the selected satellite or transponder.
GREEN button – Edits the selected satellite or transponder.
YELLOW button – Adds a new satellite or transponder.
BLUE button – Starts tuning channels on the selected satellite or transponder.
Before tuning channels, you can change the following settings in the [Channel Scan] menu:
[LCN] – Toggles Logical Channel Numbering (LCN) on or off. When LCN is enabled, digital TV channels are sorted according to the provider's preferences. Please note that enabling LCN may limit your ability to rearrange channel positions or change channel numbering.
[Auto Service Update] – When enabled, the TV searches for new channels and removes channels that are no longer found while the TV is in standby mode overnight.