To quickly reinstall all channels, follow the steps below:
1.Press the XXX.GST (Settings) button, then select [All settings] > [Channels] > [Antenna/Cable Installation] > [Search for channels].
2.Select [Quick channel reinstall] or [Channel reinstall] (if the country setting is set to the UK) to start tuning all available channels.
To go through all channel tuning steps, follow the instructions below:
1.Press the XXX.GST (Settings) button, then select [All settings] > [Channels] > [Antenna/Cable Installation] > [Search for channels].
2.Select [Advanced channel reinstall] or [Freely application setup] (if the country setting is set to the UK).
3.Select [Antenna (DVB-T)].
4.Select [Settings] and adjust the additional settings if required:
Select [Frequency scan] and choose either [Quick] or [Full]. Press XXX.GLF (Back) to return to the previous menu.
Select [Free/Scrambled] and choose either [Free channels only] or [Free + scrambled]. Press XXX.GLF (Back) to return to the previous menu.
Press the Red button to restore the default settings, or press the Green button to save the settings.
5.Select [Start] to begin tuning.
Press the XXX.GST (Settings) button, then select [All settings] > [Channels] > [Antenna/Cable Installation]. Here you can configure additional channel-related settings:
[Automatic channel update] – When enabled, the TV searches for new channels and removes channels that are no longer found while the TV is in standby mode overnight.
[Channel update message] – When enabled, an information message is displayed if channels were found, updated or removed while the TV was in standby mode.
[Digital: reception test] – Displays the signal reception quality. If reception is poor, try repositioning your antenna. To check the signal quality of the selected frequency again, select [Search] and press OK.