Instruction manual model: picture language: en

Picture Mode - Choose from the following presets.

• Standard - Default settings
• Movie - Set to be lighter in colour and less bright.
• Personal - Lets you manually alter all the settings.
• Eco - Consume 15% less energy.
• Dynamic - Recommended settings for fast moving pictures.

Contrast - Switch the balance between black and white.

Brightness - Increase or decrease the brightness of the picture.

Colour - Increases the colour from black and white.

Sharpness - Increase or decrease the sharpness of the picture.

Colour Temperature - Choose from the following presets.

• Normal - Default settings.
• Warm - Increases red within the picture.
• Cold - Increases blue within the picture.

Aspect Ratio - Picture format varies depending on the channel/broadcast. There are a number of different options to best meet your needs.

• Auto - Automatically displays the best picture format. So the picture is in the correct position. May have black lines at the top/bottom and/or sides.
• 4:3 - Displays the 4:3 picture in its original size. Side bars are shown to fill the 16:9 screen.
• 16:9 - Fills the screen with a regular 16:9 signal.
• Zoom 1/2 - The picture is the correct proportion but zoomed in to fill the screen.
• Dot by Dot (HDMI) - Will display the picture in its original resolution without any change.
• Full Screen - Stretch signal to fill the screen.

Expert Settings

• Noise Reduction - Filters and reduces the noise (interference) of the picture.
• Active Contrast - Automatically optimises the ‘backlight’ and ‘contrast’ of the picture according to the brightness of the screen.
• Backlight - Adjust the screen’s brightness by increasing/decreasing the panel’s backlighting.
• Gamma - Adjust the tones between the bright and dark parts of the picture.
• Red - Adjust red tone of the picture
• Green - Adjust green tone of the picture
• Blue - Adjust blue tone of the picture