Note: The TV input/output connections and connecting cables on these pages are shown for reference.
Cables are available separately from your retailer. Not all connections are available on all TV models.
Connecting to a device with Composite AV/Video output
TV source should be set to Composite/AV
Connection example TV models with Mini-AV input
Connection example for TV models with AV input
Connecting to a device with SCART output
TV source should be set to SCART
Connection example for TV models with Mini-AV input (1)
Connection example for TV models with Mini-AV input (2)
Connection example for TV models with L/R Audio and Video inputs
Connecting to a device with Component/YPbPr output
If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors you must connect via Component (for picture) and by Phono cable (for sound). TV source should be set to Component/YPbPr
Connection example for TV models with Mini-YPbPr and Mini-AV inputs
Connection example for TV models with Mini-YPbPr and L/R audio inputs
Connection example for TV models with YPbPr and L/R Audio inputs
Connecting to an external audio device (Amplifier, Surround Sound, Sound Bars etc)
When connecting via the TV’s 3.5mm earphone output, this will disable the TV speakers.
Note: When connecting an external audio device to the TV, set the TV volume to a higher than normal level, you will then be able to use your device remote control to adjust the volume of the connected device to suit your requirements.
Connecting to a device with HDMI output
A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio
with minimal loss of quality.
TV source should be set to the corresponding HDMI port (HDMI 1, HDMI 2 etc)
Connecting to a device with RF output (CCTV or other Analogue devices)
TV source should be set to ATV/Analogue TV.
Note: You will need to manually tune your device into an analogue channel.
Connecting an Ethernet/Network cable
The Ethernet port is used only for Pay TV services and Freeview HD (Freeview services are only available in
the UK). It is not intended for internet use.
Connecting to a USB device
To use the USB input, TV source should be set to USB Media.
Note: Tablets and/or phones can be charged via the USB port, however, it’s not possible to play back
media from these devices.
Note: Some USB devices may need to be connected to an external power supply before being used with
this input, i.e. powered hard drive.
Connecting the TV to Earphones
When connecting via the TV’s 3.5mm earphone output, this will disable the TV speakers.
